A/W-95 HOME
PLANS / VIDEO
FAQs
PHOTOS
VORTECH

Best viewed at a screen resolution of 800 x 600 or higher

Parts For Building Your A/W-95 Helicopter

Below is our list of highly affordable machined & welded parts for building the A/W-95 helicopter

NOTE: Some of the parts shown may incorporate a variation of the original A/W-95 design. This will not effect performance.

A/W-95 MAIN ROTOR PARTS
Machined parts for building
the Main Rotorhead

Includes the following:

Main rotor hub plate (1); Pitch-change
arms (2); Teeter blocks (2): U-joint
hub (1); Feathering blocks (8); Teeter
blocks (2); Teetering stop (1)

Price for all: $1,595
Free shipping in U.S.
Foreign shipping will be quoted

Ref: Main rotor prints, various

Main Rotor Blades (7" x 10')

100% aircraft-grade aluminum, bonded
and riveted. Includes weighted tip 
caps, mounting blocks and root-end
inserts. They are primed for painting.
Custom lengths also available.

Price per set of 2:  $2,490
Add $145 crating. Shipping is extra.

A/W-95 SWASH PLATE PARTS
Machined parts for building
the Swash Plate

Includes the following:

Swash plate (1); Uniball spacer (1);
Pitch change bracket lock plate (1);
Uniball assembly with sleeve (1);
Uniball sleeve plates (2)

Price for all: $795
($395 without the uniball assy.)
Free shipping in U.S.
Foreign shipping will be quoted

Ref: Swash plate prints, various

A/W-95 TAIL ROTOR PARTS
Machined parts for building
the Tail Rotorhead

Includes the following:

Tail rotor plates (2); Pitch change hub
assembly (1); Tail rotor hub (1); Tail
rotor pitch change bearing block (1)

Price for all: $475
Free shipping in U.S.
Foreign shipping will be quoted

Ref: Tail rotor prints, various

Note: some of the parts shown
incorporate a variation of the
original A/W-95 design. This
will not effect performance.

Tail rotor parts
Pitch Change Hub Assembly

(Included in above group)

Ref: Tail rotor prints, sheet 14

This variation of the original
A/W-95 design will not
effect performance.

Tail Rotor Blades

Tail blades (2) + Tail rotor pivot
bearing block, predrilled (2)
(does not include bearings or spacers)

Price for blades +
Pivot blocks:
$590/set
Free shipping in U.S.
Foreign shipping will be quoted

Ref: Tail rotor prints, sheets 7 & 9

Tail Rotor Pivot Block

This part is provided pre-drilled

(Included in above group)

Ref: Tail rotor prints, sheet 7

 
A/W-95 FRAME PARTS
Top Hat Assembly

Price: $495
Free shipping in U.S.
Foreign shipping will be quoted

Ref: Frame prints, sheets 11 & 12

 

 
Tail Rotor Housing Assembly

Price: $490
Free shipping in U.S.
Foreign shipping will be quoted

Ref. Frame prints, sheet 16

This variation of the original design
will interface with frame per print.
 


TO ORDER:
 Please fill-in and submit our Online Order Form when ordering

Special: Free boxing and shipping for above parts in the U.S. except for the main rotorblades
Foreign shipping will be quoted.

Prices subject to change without notice
 

   Home / Vortech home / Hot Specials / Homebuilts / Prismz home / Gryo home